Mighty Line Glow Floor Tape - Yellow with glow in the dark center 2" Wide
Mighty Line Glow Floor Tape - Yellow with glow in the dark center 2" Wide
Mighty Line Glow Floor Tape - Red with glow in the dark center 2" Wide
Glow in the dark Floor Tape - Mighty Line Yellow with glow in the dark center 4" Wide
Glow in the dark Floor Tape - Mighty Line Red with glow in the dark center 4" Wide
Glow Floor Tape Mighty Line Aisle Example
  • SKU: 2RYLUMCTR
  • Brand: Mighty Line Floor Tape

Mighty Line Floor Tape - Glow-in-the-Dark Center

Light the way to exits in the event of a power outage with Glow in the Dark Mighty Line Floor Tape.   The center line of this tape remains a high intensity illumination for up to 45 minutes after the lights go out and fades to zero after 8 hours.   This allows plenty of time to follow exit paths without tripping over equipment.  

  • Available in 2" and 4" x 100' yellow or red rolls.
  • Easy peel and stick installation.
  • Centerline glows brightly for 45 minutes then maintains diminishing glow for 8 hours.

Read More...

$157.00
  • Delivering since 2010
  • Satisfaction Guaranteed
  • Secure Checkout
  • Description
  • Features
  • Videos
  • DOCUMENTS
  • ACCESSORIES
  • INSTRUCTIONS
Description

Light the way to exits in the event of a power outage with Glow in the Dark Mighty Line Floor Tape.   The center line of this tape remains a high intensity illumination for up to 45 minutes after the lights go out and fades to zero after 8 hours.   This allows plenty of time to follow exit paths without tripping over equipment.  

  • Available in 2" and 4" x 100' yellow or red rolls.
  • Easy peel and stick installation.
  • Centerline glows brightly for 45 minutes then maintains diminishing glow for 8 hours.
features

Mighty Line Glow Floor Marking Tape Features: 

  • Easy peel and stick application to industrial floors
  • Durable .050 thick PVC to withstand forklift traffic
  • Beveled tape edges to prevent snagging and pulling up 
  • Bright colors for eye catching aisle marking
  • Luminescent glow-in-the-dark center
  • Strong adhesive to last years in your warehouse or production facility
  • 3 year limited warranty
  • Multiple colors and widths available
  • Easily cleaned with standard floor scrubbers


Videos

For maximum adhesion and product life, be sure to check the cleanliness of your before install. 

See how in the video below:


Documents

Safety standards - Here are a few standards to keep in mind when marking aisles with Mighty Line Floor Tape

OSHA Standards:

  • 29 CFR 1910.176(a) - Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.


  • Official interpretation of CFR 1910.22(b) states
    • Recommended width of aisles is at least 3 feet wider than the largest equipment to be utilized, or a minimum of 4 feet – whichever is greater.
    • Marking lines can be of any color “so long as they clearly define the area considered as aisle space.”
    • Recommended width of aisle markings varies from 2 inches to 6 inches; therefore, any width 2 inches or more is considered acceptable


  • 1910.36(g)(2) - An exit access must be at least 28 inches (71.1 cm) wide at all points. Where there is only one exit access leading to an exit or exit discharge, the width of the exit and exit discharge must be at least equal to the width of the exit access.


  • 1926.152(b)(4)(vii) – Flammable Liquids - In every inside storage room there shall be maintained one clear aisle at least 3 feet wide. Containers over 30 gallons capacity shall not be stacked one upon the other

Accessories

Accessories for Mighty Line Floor Tape

  • Mighty Line Floor Cleaner : HERE
  • Other Mighty Line Floor Tape Products: HERE

Instuction

Mighty Line Floor Marking Tape Install Instructions:

  1. Determine the area to be marked with floor tape
  2. Clean floor with standard cleaning agents by hand or with floor scrubber
  3. Dry floor and make sure surface temperature is above 55°F 
  4. Create a reference line with string, laser or use an existing line for reference
  5. Begin the stripe application- remove 12" section of backing. Adhere to floor
  6. Unroll tape along the reference line (adhesive not exposed). Adjust as needed
  7. Apply the rest of the floor tape, starting from previously applied section
    1. Remove backing and apply down the line
    2. Continue to use reference line
    3. Cut with scissors at the end of the stripe
  8. Done! No Mess, No dry time, No harsh chemicals